Skip to content

ChromeOS Battery Testing Command

The battery_test command in ChromeOS provides a way to measure and analyze battery discharge rates through the Chrome OS Shell (crosh). This chapter explains how to use this diagnostic tool effectively.

Command Overview

The basic syntax for the command is: bash battery_test [<test length>]

Where: - test length is an optional parameter specifying the duration in seconds - If no duration is specified, the test runs for 300 seconds (5 minutes)

Understanding the Command

Basic Usage

```bash

Run default 5-minute test

battery_test

Run custom duration test (e.g., 10 minutes)

battery_test 600 ```

Test Duration Guidelines

  1. Quick Test (300 seconds)
  2. Default duration
  3. Good for basic diagnostics

  4. Suitable for routine checks

  5. Extended Test (600-1800 seconds)

  6. More accurate results
  7. Better for detailed analysis

  8. Recommended for troubleshooting

  9. Long-Duration Test (>1800 seconds)

  10. Most accurate discharge rate
  11. Best for battery health assessment
  12. Useful for comparative analysis

Running Battery Tests

Test Preparation

  1. System Setup
  2. Connect to power source initially
  3. Close unnecessary applications
  4. Disable screen timeout

  5. Set screen brightness to a fixed level

  6. Environmental Conditions

  7. Maintain consistent temperature
  8. Avoid direct sunlight
  9. Keep device stationary
  10. Ensure normal operating conditions

During the Test

  1. Monitoring
  2. Keep the device running
  3. Avoid opening new applications
  4. Don't change system settings

  5. Monitor for any errors

  6. Test Conditions

  7. Disconnect from power source when prompted
  8. Maintain consistent workload
  9. Avoid system sleep

Interpreting Results

Test Output

The command provides information about: - Initial battery charge level - Final battery charge level - Discharge rate calculation - Test duration verification

Understanding Metrics

  1. Discharge Rate
  2. Measured in percentage per hour
  3. Lower rates indicate better efficiency

  4. Compare against baseline measurements

  5. Battery Health Indicators

  6. Unusual discharge rates
  7. Irregular patterns
  8. Comparison with expected values

Best Practices

Testing Schedule

  1. Regular Testing
  2. Monthly basic tests
  3. Quarterly extended tests

  4. After system updates

  5. Documentation

  6. Record test results
  7. Note testing conditions
  8. Track changes over time

Test Conditions

  1. Consistency
  2. Use similar settings each time
  3. Test under similar conditions

  4. Maintain consistent workload

  5. Accuracy

  6. Run multiple tests
  7. Average the results
  8. Note any anomalies

Common Use Cases

Diagnostic Testing

```bash

Quick diagnostic

battery_test 300

Detailed analysis

battery_test 900

Comprehensive test

battery_test 1800 ```

Troubleshooting

  • Battery life issues
  • Performance concerns
  • Warranty verification

Analyzing Results

Normal Range

  • Typical discharge rates
  • Expected variations
  • Standard deviations

Red Flags

  1. High Discharge Rates
  2. Possible battery degradation
  3. System optimization needed

  4. Hardware issues

  5. Inconsistent Results

  6. Test environment issues
  7. System problems
  8. Battery health concerns

Additional Tips

  1. Test Frequency
  2. Regular intervals for baseline
  3. After system changes

  4. When troubleshooting

  5. Result Management

  6. Keep logs of results
  7. Track trends
  8. Document anomalies